INFCS Strain Meter/Controller

STRAIN METER / CONTROLLER

INFCS
Wide Range of Scaling in Engineering Units
Built-In Excitation
Analog Output Optional
Dual Relays Optional
Tare Button
Peak Memory

The INFINITY^® C strain meter/controller accepts a wide variety of DC voltage and current inputs to cover any typical process application. Standard features include a full 14-segment 4-digit display, easy front panel scaling to virtually any engineering units, selectable excitation of four voltages to work with most transducers and transmitters, front panel and remote tare function for weighing applications, and a hardware lockout to prevent unauthorized changes in setup.

The INFINITY^® C strain meter is ideal for use with pressure transducers, load cells, or any strain gage type transducers. Four full digits and simplified scaling via the front-panel pushbuttons make it easy to set the display to read in any engineering units. All these standard features add up to an instrument with powerful capabilities at an extremely affordable price.

LCGD Series Load Cells

Available from
OMEGADYNE, INC.

SPECIFICATIONS
Input Ranges: 0-100 mV, ▒50 mV, 0-10 V, ▒5 V, 0-20 mA, 4-20 mA
Isolation: 354 V peak per IEC spacing
NMR: 60 dB
CMR: 120 dB
Protection: 240 V rms max for voltage input ranges; 200 mA for current ranges
Input Impedance: 100 Meg ohms for 100 mV or ▒50 mV range; 1 Meg ohm for 10 V or ▒5 V range; 5 ohms for 20 mA current input
Display: 4-digit ,14 segment, 13.8 mm (0.54") Height
Analog-to-digital technique: Dual slope
Internal resolution: 15 bits
Read rate: 3/sec
Polarity: Automatic
Max error strain/process: ▒0.03% rdg
Span tempco: ▒50 ppm/░C
Step response: 1-2 sec
Warmup to rated accuracy: 30 min
Analog output (optional): 0-10 V, 4-20 mA or 0-20 mA; may be assigned to a display range or used as a proportional control output with setpoint #1, order INFCS-011A.
Excitation voltage: 24 V @ 25 mA or 12 V @ 50 mA; 10 V @ 120 mA or 5 V @ 60 mA
Power: 115 V or 230 V rms ▒15%, 50-60 Hz; 6 watts
Operating temperature: 0 to 50░ C (32 to 122░F)
Storage temperature: -40 to 85░C (-40 to 184░ F)
Relative humidity: 90% at 40░C (104░F) (non-condensing)
Panel cutout: 1/8 DIN, 45 x 92 mm (1.78" x 3.62")
Weight: 574 g (1.27 lb)

To Order (Specify Model No.) Prices Shown in U.S. Dollars

Model No.	Description	Price
*INFCS-( )00 A**	Digital Strain Meter with excitation, basic unit	$245
*INFCS-( )01 A**	Digital Strain Meter with non-isolated Analog output	$325
*INFCS-( )10 A**	Digital Strain Meter with dual ( 6-Amp from "C" relays )	$315
*INFCS-( )11** A	Digital Strain Meter setpoint and non-isolated Analog output	$395
*INFCS-( )12 A**	Digital Strain Meter setpoint and isolated Analog output	$405

Ordering Example: INFCS-010, INFINITY^® C strain meter with dual relays, red LED display, 115 Vac power, $315.

Power and Display Selection

Order Code	Power	Display	Add'l Price	Order Code	Power	Display	Add'l Price
0	115 Vac	red	N/C	4	10-32 Vdc	red	$95
1	230 Vac	red	N/C	5	10-32 Vdc	green	$95
2	115 Vac	green	N/C	6	26-56 Vdc	red	$120
3	230 Vac	green	N/C	7	26-56 Vdc	green	$120

Ordering Example: INFCS-011, strain meter with 115 Vac power red LED display, analog output, dual relays, $395.